TNP vertical chemical pump
With motor directly coupled to the pump shaft and plain bearing.
Vertical setting depths up to 1600 mm, with suction pipe up to 3200 mm
Applications:
The TNP pump is specifically designed to handle acids, alkalis or chemically contaminated fluids with or without solids.
Construction:
Vertical centrifugal pump with volute casing for wet end arrangement; dry end arrangement possible.
Performance Data
| Pump capacity: |
up to 110 m³/h |
| Total differential head: |
up to 45 m |
| Operating temperature [t]: |
0°C up to +100 °C |
| Operating pressure [p]: |
up to 10 bar |
| Diameter of discharge nozzle: |
DN 32 up to DN 80 |
| Motor sizes up to ICE motor size: |
up to 132 |
Materials
The chemical pumps are available in PP, PVDF as well as in corrosion-resistant PFA for universal fluid compatibility.
Mechanical seals:
All silicon carbide components are fabricated from EKasic® C known for its unsurpassed wear and corrosion resistance properties.
MUNSCH REA F single mechanical seal:
Stationary and rotating seal rings fabricated from EKasic® C; the spring is encapsulated in fluoroplastics.
MUNSCH REA F/D double mechanical seal:
Product-side stationary and rotating seal rings fabricated from EKasic® C, atmosphere-side stationary seal ring made of carbon; stainless steel spring.
Shaft sleeve:
Fluoroplastics-coated stainless steel
|
Your benefits :
Minimum LCC (Life Cycle Cost)
through numerically optimized hydraulics
No startup damage
The impeller is keyed to the shaft and is therefore bi-directional and unaffected by inadvertent reverse rotation.
Added reliability
Wall thicknesses of 10 mm and over ensure maximum operating reliability in service conditions involving abrasive or permeating media.
Compact design
Fits in snugly where conventional pump configurations are facing a space problem.
|
