»The latest generation of our easy to handle, lightweight and reliable hot air welding torch Quick-L-Electronic.«
Product Description
The hot air welding torch Quick-L-Electronic is characterised by a small handle that is both easy to grip and easy to use. Combined with a strong heat output of 1500 W 230V, the low-weight torch facilitates professional and fatigue-free welding.
In addition, the torch is equipped with a cold stage that can be switched on without changing the preselected heating stage.
The motor’s commutator carbons can be replaced several times, thus facilitating a continuous operation of the device. The carbons are easy to replace from the outside without having to open the device.
New! Our hand-held hot air welding torches’ carbon brushes are equipped with a safety lock that prevents damage to the motor when the carbons are used up.
The air-cooled heating element pipe matches numerous different nozzle shapes.
The all-purpose device for welding any type of thermoplastic resin, technical textiles, tarpaulin materials, pond liners, roofing foils and foils used in swimming pool construction.
Can be used to repair truck tarpaulins and tents, to weld PVC floor coverings and linoleum
Processing of hard thermoplastic materials used in plastics and tank construction
For installation in machines and on conveyor belts
For use in repair shops to repair plastic parts in motorcars and motorbikes
For use in electromechanical work
Technical Specifications
Model
QUICK-L-ELECTRONIC
Voltage
230 V 50/60 Hz oder 120 V 50/60 Hz
Heat output
1500 W 230 V oder 120 V
Temperature
20–700 °C, infinitely variable
Weight
1200 g with 3 m connection cable
Dimensions
Length 320 mm, handle diameter 52 mm
Pressure Static
Electrical safety: Double insulated
MINI-Electronic
»small and light-weight hot air welding gun.«
Product Description
Due to its light weight and handiness, the insulated welding gun MINI-electronic is perfectly suited for plastics fitters and tank manufacturers.
The heat output of 1500 W 230 V is infinitely variable between 20 and 700 °C and is kept constant by an electronic control system. In addition, it is possible to adjust the required air flow by means of an additional rotary knob.4
The device requires an external air supply, such as a side channel blower, fan or compressor. We additionally offer a mobile hand-held fan that is easy to carry and supplies the required air on construction sites and in the field.
If necessary, it is possible to equip the welding gun with a threaded slip-on nozzle M 10. This slip-on nozzle permits the use of screw-on quick-weld nozzles, which are preferably used in plastics and tank construction due to their high degree of stability.
The welding gun MINI-electronic can be equipped with numerous accessories for welding plastic plates, pipes, components and tanks.
At construction sites and for use in the field, the additionally available hand-held fan supplies the required air flow.
Technical Specifications
Model
MINI-ELECTRONIC
Voltage
1500 W 230 V 50/60 Hz or 120 V 50/60 Hz
Temperature
20-700 °C, infinitely variable
Air requirement
80 – 250 litres/min
Weight
0.395 kg + 3 m connection cable
Dimensions
Length 270 mm, handle diameter 54 mm
Electrical safety: Double insulated
Grand-L-Electronic
»The strong hot air welding fan for industry and trade.«
Product Description
The hot air fan GRAND-L-electronic is useful everywhere hot air flows are needed for heating, shaping, shrinking and activating.
The heat output of optionally 2600 W or 3000 W 230 V is infinitely variable from ambient temperature up to 650 °C. The device is furthermore equipped with an additional cold stage that can be switched on without changing the preselected heating stage. Depending on the nozzle, the air flow rate amounts to 450 litre/min.
The air flow can be changed by miscellaneous slip-on nozzles, thus offering numerous application possibilities.
NEW!
The motor carbons are equipped with a safety lock that prevents damage to the motor when the carbon brushes are used up.
With its 1360 g inclusive of the 3 m connection cable, the weight of the GRAND-L-electronic is so low that it can be used both as purely hand-held device and for installation in miscellaneous machines.
In the painting industry, the GRAND-L-electronic’s air flow is centred by means of a slip-on wide slot nozzle to burn off old paints and varnishes.
Technical Specifications
Model
GRAND-L-ELECTRONIC
Voltage
230 V or 120 V 50/60 Hz
Heat output
2600 W / 3000 W 230 V or 120 V
Temperature
20–700 °C, infinitely variable
Weight
1360 g with 3 m connection cable
Dimensions
Length: 315 mm, handle diameter: 52 mm
Electrical safety: Double insulated
Quick-S-Electronic
»The new manual welding equipment from the S-Line product range. An ergonomic and innovative design combined with state-of-the-art technology for welding and for the processing of thermoplastics.«
Product Description
The hot-air welding equipment Quick-S-Electronic stands out for its unique ergonomic handle. Thanks to its ergonomics and light weight the user can handle the equipment professionally and effortlessly.
The equipment has a heat output of 1500 Watts 230 V and a constant and completely reliable electronic control for temperatures up to 700 °C.
Moreover, the equipment is easy to service thanks to a new motor generation with considerably increased carbon service lives of more than 1,500 hours. The collector carbons are also equipped with a disconnection organ, which prevents damage to the motor after the carbon brushes have been worn down. The collector carbons can be changed several times. Carbons can be easily changed from the outside without the need to open up the equipment.
The air-cooled heating element pipe is suitable for various different shapes of nozzle.
The all-round equipment for the welding all thermoplastics, technical textiles, tarpaulin sheets, pond sheeting, roof sheeting and swimming pool construction sheeting.
For the repair of car tarpaulin and tents, welding of PVC floor coverings and linoleum
For the processing of all thermoplastic hard materials in plastic treatment and container construction
Shrinking of packaging film and shaped parts
Separating and merging of synthetic threads and fabrics
Sterilising of packaging materials
Plastic deflashing and polishing of plastic surfaces
For use in electromechanical work
Shrinking of heat shrink tubing, packaging film
Heating for deforming thermoplastic semi-finished products
Technical Specifications
Model
QUICK-S-ELECTRONIC
Nominal voltage range
120 V or 230 V~
Frequency range
50Hz - 60Hz
Power
120 V 1650 W or 230 V 1500 W
Output temperature
≤ 700°C
Noise emission level
< 70dB
Weight
1.2 kg with mains connection lead
Protection class
II/(double insulation)
Grand-S-Electronic
»The new hot-air blower from the S-Line product range. Ergonomic and innovative design combined with state-of-the-art technology for the processing of thermoplastics.«
Product Description The hot-air blower Grand S-Electronic is used anywhere hot air flows, is required for warming up, heating, deforming, shrinking and activating.
The choice of heat output of either 3000 W or 3400 W 230 V can be seamlessly adjusted from room temperature to 700 °C. The device is fitted with a new and very reliable electronic temperature control. The air output is, depending on nozzle, 450 litres/min.
The air flow can be changed by various plug-on nozzles, meaning that various uses are possible.
The hot air blower Grand S-Electronic stands out for its unique ergonomic handle. Thanks to its ergonomics and light weight the user can handle the equipment professionally and effortlessly.
Moreover, the equipment is easy to service thanks to a new motor generation with considerably increased carbon service lives of more than 1,500 hours. The collector carbons are also equipped with a disconnection organ, which prevents damage to the motor after the carbon brushes have been worn down. The collector carbons can be changed several times. Carbons can be easily changed from the outside without the need to open up the equipment.
With its 1400 g weight and 3 m lead the Grand S-Electronic is light, meaning it can be used purely as hand equipment and for installation into various machines.
For installation into machines and on conveyer belts
For use in repair shops for the repair of plastic components on cars and motorcycles
For use in electromechanical work
Shrinking of heat shrink tubing, packaging film
Heating for deforming thermoplastic semi-finished products
Drying of wet and damp surfaces
Thawing out of frozen water pipelines
Removal of old shellac and epoxy resin
Activating and detaching of solvent-free adhesives and hot-melt adhesives
Drying and heating processes of all kinds
Shrinking of packaging film and shaped parts
Separating and merging of synthetic threads and fabrics
Sterilising of packaging materials
Plastic deflashing and polishing of plastic surfaces
