The electrofusion welding machine of the latest generation for the welding of pipes and fittings of all kind is equipped with a mature inversion technology. The device is absolutely appropriate for the building site due to the approved WIDOS technology and convinces with a weight of only 12 kg. The VA protective frame not only protects the welding machine against damages, it also serves as a handle and aid for winding the welding and power supply cables. Both cables have a length of minimum 4 meters and can be provided in other lengths on request. The barcode reading pen is quickly replaceable by a protected plug connection and secured against falling down by a leather bag. The serial authorization card and an adaptor plug for the most common fittings are stored in a detachable side pocket. This pocket disposes of sufficient space for further accessories, e. g. manual scraper.

The welding data entry is effected by barcode reading pen, manual entry of the numerics on the fitting or by authorizing via the master card and free entry of the welding parameters (Volts and welding time) with only four keys on the device. The two-lined display is brightly illuminated and well readable as well as temperature compensated from -10°C up to +60°C.

Additionally, the device can be activated on remote controlled basis by the user in the trench resp. in direct proximity to the electrofusion welding connection. The welding data is stored in the RAM resp. external memory and can later be read out by WICON 2000 (same software as with SPA 600 and CNC 3.0) or directly printed from the device. The ESI 4000 is delivered in either a transport box (wood) or in a high quality transport and storage case (aluminium).

With 4 pipe holding fixtures for the fixation and positioning of the pipes and the electrofusion couplers during the welding process and the cooling time.

With the 45° and 90° connecting adapter including 2 pipe holding fixtures, all combinations can easily be fixed. The pipes are clamped by means of clamping belts.

Holder size 1 For the diameters OD 20, 25, 32 and 40 mm

Holder size 2 For the diameters OD 50, 63, 75 and 90 mm

Holder size 3 For the diameters OD 110, 125, 160 and 180 mm

Simple scraping within seconds of outer edges of plastic pipes. Handy & light weight !!

The WIDOS pipe peeling tool is available in 2 versions: for use with pipes of diameter 32 mm through 110 mm and with pipes of diameter 110 mm through 500 mm. It is easy to handle and reliably removes oxide layers on PE-HD pipes!

Size 1, diameters 32-110mm

Size 2, diameters 110-500mm