Inside debeader for removing the welding bead in PE and PP pipes with an inside diameter from ID 90 mm up to ID 160 mm (WIDOS inside debeader 160), ID 160 mm up to ID 300 (WIDOS inside debeader 300), ID 300 mm up to ID 500 mm (WIDOS inside debeader 500), up to an insertion depth of maximum 12 m. Ideally the bead is cut out during the cooling down period.

The device consists of: cutting head (230 V) with blade and surface sensors for scanning the inside pipe surface in order to avoid cutting into the basic material. Guiding skids for cutting head and distance piece for the basic guide rod to adjust the respective inside diameter. Guiding rods up to an insertion depth of 12 m (VA rods with locks as well as a motion rod with two handles).

Supplementary package for lengthening up to 20 m insertion depth available.

Inside debeader 80 from ID 40 up to ID 80

Ultra-light and solid device for the safe, easy and power saving removal of the outside welding beads after butt welding. Due to the compact construction the device can also be used at pipes still clamped in the machine, e. g. during cool down time without a time consuming removing of the clamping tools being necessary.

Afterwards applicable with quick-action adjustment of the diameters needed according to a scale.

Size 1 : OD 110 - 160mm
Size 2 : OD 140 - 250mm
Size 3 : OD 180 - 315mm
Size 4 : OD 280 - 450mm
Size 5 : OD 450 - 630mm
Size 6 : OD 630 - 1000mm
Size 7 : OD 900 - 1200mm

WIDOS Outside debeader 20 - 90 mm

For the trouble-free removal of the outside welding bead at PE, PP and PVDF pipes and independent from the pressure rate for OD 20 - 90 mm.