Welding machine for heating element plastic socket welding of PE, PP, PB and PVDF tubes and fittings from OD 20 up to OD 75 mm.

The motion for the socket welding is controlled by a rack-and-pinion mechanism.

For the accomodation of the workpieces, temper steel prismatic clamping tools are available which make it possible to clamp the workpieces regardless of their diameter. There is a double clamping on the pipe side and a single clamping with insertion stop on the fitting side.

The two tool slides can be axially aligned. For the simple fixing of the pipe and the socket fittings, the machine has an automatic insertion stop. The insertion depth of the welding is limited by a stop.

The electronically controlled heating element (230 V/630 W) which can be swivelled into the machine holds the anti-stick coated heating tools. It can also be removed from the prismatic mount and put into a table locking device for external use. Also available in inches, °F and 110 V.

Plastic welding machine for heating element socket welding of PE, PP, PB and PVDF tubes and fittings from OD 20 up to OD 125. The machine is mounted on a solid frame. The motion of the slides is controlled by a rack-and-pinion mechanism. Due to the steplessly adjustable prismatic clamping tools, all outside diameters can be fixed. On the pipe side there is a double prism, on the fitting side an insertion stop. The insertion depth is secured by a turning button depending on the diameters. Both sides can be aligned in the axial plane for the adjustment of the parts to be welded. The positioning is made by means of an insertion stop.

The heating element holder for the socket heating element (230 V/1400 W) which can be swivelled in, is built on the machine. In connection with a table locking device it can be removed from the holder and used as a hand heating element. With ON/OFF switch, electronical adjustment and control of the temperature in accordance with DVS 2208.

Welding machine for heating element socket welding of PE, PP, PB and PVDF tubes and fittings from OD 63 up to OD 160 resp. 4" to 6". The machine is mounted on a solid frame. The motion of the slides is controlled by a rack-and-pinion mechanism. Due to the steplessly adjustable prismatic clamping tools, all outside diameters can be fixed. On the pipe side there is a double prism, on the fitting side an insertion stop. The insertion depth is secured by a turning button depending on the diameters. Both sides can be aligned in the axial plane for the adjustment of the parts to be welded. The positioning is made by means of an insertion stop.

The heating element holder for the socket heating element (230 V/1400 W) which can be swivelled in, is built on the machine. In connection with a table locking device it can be removed from the holder and used as a hand heating element. With ON/OFF switch, electronical adjustment and control of the temperature in accordance with DVS 2208.

Welding machine for heating element socket welding of PE, PP and PVDF pipes and fittings from OD 20 up to OD 125, and for the heating element butt welding of PE, PP and PVDF tubes and fittings from OD 50 up to OD 160 with SDR 7,25. Complete with welding pressure setting and scale, planer with electrical chain drive in a closed aluminium housing and external chip removal. The machine carriage works with a linear prismatic guideway on a solid basic frame.